Corrugated Cardboard Carton Box Single Facer Line

Basic Info

Product Description

Introduction:

YK-SFL Single Facer Line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of a Paper Roll stand, a Single facer machine, paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation, and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.

Specification:

Hydraulic mill roll stand

I, Structural features

1.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.

2.Brake adjustable adopts a multipoint braking system.

3.Each paper rack is equipped with two paper carts that can be served simultaneously from both sides.

II,Technical parameter

1,Paper clip range maximum : 1800mm minimum : 1000mm

2,Folder diameter maximum : 1500mm minimum : 350mm

3,Main shaft diameter of paper holder:¢240mm

4,Gas source work pressure(Mpa):0.4---0.8Mpa

III,Hydraulic system parameters

1,Work pressure(Mpa):16---18Mpa

2,Lifting hydraulic cylinder:¢100×440mm

3,Clamping hydraulic cylinder:¢63×1300m

4,Hydraulic station motor power:3KW --380V -- 50Hz
5,Solenoid valve voltage:220V 50 Hz

SF-280S fingerless type single facer

Structural features:

1, Adopt a vacuum suction structure, with a high-pressure strong blower. Suction with a silencer.

2, base and wallboard cast iron wall, Wallboard thickness130mm.Universal Joints.

3, corrugated roller material adopt 50CrMo Alloy steel

4, pressure roller ¢ 284mm, surface grinding and chrome-plated; cylinder control and remove up and down, 45 carbon steel materials, quenching (with cushioning devices).

5, pneumatic control glue to glue back, glue roller diameter ¢215mm, Engraved polished surface after a 36-line pit style textured machined chrome-plated, after scraping the roller surface polished hard chrome plated.

6, Corrugated roller, pressure roller materials provided by the Central Plains Steel, High on corrugating unilateral 0.15mm, 0.075mm high-pressure roller unilateral. Plus stopper. ¢ 160mm cylinder with compression cylinder.

7, preheat roll adopt seamless steel pipe production by tiangang ¢ 300mm, connecting with metal Hose.

Technical parameters:

1,effective width:1600mm 2,operation direction:left or right(determined in accordance with customer plant)

3,design speed:100m/min working speed:60m/min

4,temperature range:200-260ºC

5,corrugated flute:(UV type or UVV type)

NC Computer sheet cutter machine

Structural features:

1, can save 200 sets of orders, replace the cutting specifications quickly and accurately, non-stop for a single, and can achieve computer networking, easy production management.

2, knife shaft drive gear with eccentric shaft installation, to achieve no backlash drive, high transmission accuracy.

3,cross-cutting knife with the inserts steel blade. Fixed blade flat structure, more stable, more suitable for cutting high weight and high toughness of cardboard, the shear force is small, long blade life.

4, pull paper roller outsourcing non-slip material, more wear-resistant, accurate size.

5, host base and wall panels with high-grade gray cast iron, high strength, strong anti-vibration.

6, servo controller control motor drive, 5.7-inch color touch screen display, the project at a glance.

cutting length: 300mm-9000mm, cutting accuracy: ± 1.5mm (steady speed).

General technical parameters:

1.Working width:1600mm

2.Mechanical speed:60m/min

3.Minimum cut length:300mm

4.Maximum cutting length:9000mm

5.Cutting accuracy: uniform speed ±1.5mm

Power motor and electrical parameters:

1.Main drive motor power:3KW

2.Full AC Synchronous Servo Control

3.Papermaking motor power:3KW(Frequency)